PROJECT 1323:
5701 Manufacturers Dr
| Submitted by: | Newcomb Construction Co. |
| Project type: | Permitted Use |
| Description: | dock door addition |
| Status: | completed on 5/21/2009 |
Project has been completed.
| Agency | Status | Requirements | Remarks | Checkout Date | Reviewed |
| Zoning | approved | | 1 2 | 2/27/2009 | 2/27/2009 |
| Traffic Engineering | approved | | 1 2 | 2/23/2009 | 2/23/2009 |
| Fire | approved | | | 2/24/2009 | 2/26/2009 |
| Engineering | approved | | 1 2 3 4 5 | 2/24/2009 | 2/24/2009 |
| Real Estate | approved | | | 4/15/2009 | 4/15/2009 |
| Engineering Mapping | approved | | 1 | 2/27/2009 | 3/4/2009 |
Engineering
Note:
Supplementary Condition Completed (was The applicant shall demonstrate compliance with Section 37.07 and 37.08 of the Madison General Ordinances regarding permissible soil loss rates. The erosion control plan shall include Universal Soil Loss Equation (USLE) computations for the construction period. Measures shall be implemented in order to maintain a soil loss rate below 7.5-tons per acre per year.)
Note:
Supplementary Condition Completed (was This site will disturb 4,000 sf or more of land area and require an Erosion Control Permit. Please submit an Erosion Control and Storm Water Management Permit Application for approval.)
Note:
Supplementary Condition Completed (was Fee for erosion control permit: $90 plus $4 per 1000 sf disturbed area.)
Note:
Supplementary Condition Completed (was Fee for stormwater management permit: $5 per 1000 sf new impervious area.)
Note:
Supplementary Condition Completed (was Submit plan sheets in pdf format to jbenedict@cityofmadison.com.)
Top
Engineering Mapping
Note:
Supplementary Condition Completed (was The Applicant shall submit, prior to plan sign-off, a digital CAD file (single file) to the Engineering Program Specialist in the Engineering Division (Lori Zenchenko). The digital CAD file shall be to scale and represent final construction. The single CAD file submittal can be either AutoCAD (dwg) Version 2001 or older, MicroStation (dgn) Version J or older, or Universal (dxf) format and contain the only the following data, each on a separate layer name/level number: a) Building Footprints; b) Internal Walkway Areas; c) Internal Site Parking Areas; d) Other Miscellaneous Impervious Areas (i.e. gravel, crushed stone, bituminous/asphalt, concrete, etc.); e) Right-of-Way lines (public and private); f) All Underlying Lot lines or parcel lines if unplatted; g) Lot numbers or the words “unplatted”; h) Lot/Plat dimensions; i) Street names. All other levels (contours, elevations, etc) are not to be included with this file submittal. NOTE: Email file transmissions preferred Lzenchenko@cityofmadison.com . Include the site address in the subject line of this transmittal. Any changes or additions to the location of the building, sidewalks, parking/pavement during construction will require a new CAD file.)
Top
Traffic Engineering
Note:
Supplementary Condition Completed (was The applicant shall show the dimensions for all existing parking stalls’ items B, C, D, E, F, and degree of angle parking width and backing up, according to Figures II "Medium and Large Vehicles" parking design standards in Section 10.08(6)(b) 2. Signs and planting areas are to be excluded from the rectangular stall areas including the two (2) feet of vehicle overhang. The two (2) feet of vehicle overhang shall be shown on the plan and dimensioned. The applicant shall redraft sheet C-101 and submit 1 copy to Traffic Engineering as a supplement.)
Note:
Supplementary Condition Completed (was “Stop" signs shall be installed at a height of seven (7) feet at all driveway approaches behind the property line and noted on the plan. All directional/regulatory signage and pavement markings on the site shall be shown and noted on the plan. The applicant shall redraft sheet C-101 and submit 1 copy to Traffic Engineering as a supplement.)
Top
Zoning
Note:
Supplementary Condition Completed (was Show the existing bike parking stalls on sheet C 101. A bike stall is a minimum of 2 feet by 6 feet with a 5 foot wide access aisle.)
Note:
Supplementary Condition Completed (was Show the accessible signage at the head of the handicap accessible stalls.)
Top
