This is the original submission, which is not
the current revision.
This display is available for archival purposes.
PROJECT 1369:
302 S Gammon Rd (was 7010 Mineral Point Rd)
| Submitted by: | Plunkett Raysich Architects, LLP |
| Project type: | Minor Alteration to CU |
| Description: | Change of Use |
| Status: | completed on 7/28/2009 |
Project has been completed.
| Agency | Status | Requirements | Remarks | Checkout Date | Reviewed |
| Zoning | supplement needed | 1 2 3 | | 4/22/2009 | 4/27/2009 |
| Traffic Engineering | approved | | 1 | 4/21/2009 | 4/24/2009 |
| Fire | approved | | 1 | 4/23/2009 | 4/25/2009 |
| Engineering | supplement needed | 1 | 2 | 4/27/2009 | 4/28/2009 |
| Planning | supplement needed | 1 | | 4/24/2009 | 4/24/2009 |
| Engineering Mapping | denied | 1 2 3 4 5 | | 4/29/2009 | 5/4/2009 |
| Revision | Submit date |
| original | 4/20/2009 |
| 1 | 5/8/2009 |
Engineering
Supplementary material required:
Submit PDF of site plan for Engineering records. File can be emailed to Tim Troester at ttroester@cityofmadison.com
Note:
Interior building renovation, no land disturbance proposed. No erosion control or storm water management permit requirements.
Top
Engineering Mapping
Redraft required:
Site plan scale is shown to represent 1"=50' yet the plan appears to scale 1"=40'. Confirm and identify the actual plan scale.
Redraft required:
Site plan has a note stating the drawing is based on an original survey. This original survey does not represent current ownership. It appears that in 1997 a portion of this parcel (Lot 1, CSM 7827) was deeded by Quit Claim Doc. No. 2880002 to the adjacent parcel to the West (Lot 2, CSM 7827) to satisfy some parking requirements for that particular site. Revise the plan to correctly represent actual ownership.
Supplementary material required:
The Applicant shall submit, prior to plan sign-off, a digital CAD file (single file) to the Engineering Program Specialist in the Engineering Division (Lori Zenchenko). The digital CAD file shall be to scale and represent final construction. The single CAD file submittal can be either AutoCAD (dwg) Version 2001 or older, MicroStation (dgn) Version J or older, or Universal (dxf) format and contain the only the following data, each on a separate layer name/level number: a) Building Footprints; b) Internal Walkway Areas; c) Internal Site Parking Areas; d) Other Miscellaneous Impervious Areas (i.e. gravel, crushed stone, bituminous/asphalt, concrete, etc.); e) Right-of-Way lines (public and private); f) All Underlying Lot lines or parcel lines if unplatted; g) Lot numbers or the words “unplatted”; h) Lot/Plat dimensions; i) Street names. All other levels (contours, elevations, etc) are not to be included with this file submittal. NOTE: Email file transmissions preferred Lzenchenko@cityofmadison.com . Include the site address in the subject line of this transmittal. Any changes or additions to the location of the building, sidewalks, parking/pavement during construction will require a new CAD file.
Supplementary material required:
Provide recorded lease or agreements between this property and the property to the West that identify arrangements for the shared parking of the existing 76 stall parking area.
Supplementary material required:
The existing address of 7010 Mineral Point Rd. does not conform to City of Madison 10.34 MGO. The address for this site will be changed to 302 S. Gammon Rd. Contact Lori Zenchenko (LZenchenko@cityofmadison.com or 266-5952) for any questions relating to addresses.
Top
Fire
Note:
Measuring hydrant distance is not as it is shown on the plan, it is not a radius of 500 feet, it is within 500 feet as it lays off the truck. So the correct way to measure is to go down the street up the driveway and around the building. This building is exsiting with no exterior additions to the build and has hydrants located near it previously approved, so not reviewed for the hydrant code of today.
Top
Planning
Supplementary material required:
Alderperson's recommendation required.
Top
Traffic Engineering
Note:
RENOVATED EXISTING BUILDING ONLY- No site plans to review
Top
Zoning
Supplementary material required:
All bike stalls must be shown on the site plan. Stalls must be a minimum of 2’ X 6’ and have a 5’ access aisle. See http://www.cityofmadison.com/trafficEngineering/bicyclingParking.cfm for further specifications. Please note type of racks to be installed on plan.
Supplementary material required:
Accessible signage must be shown on the site plan. Signage must be installed at the head of all accessible parking stalls. Signs must be a minimum 12” X 18” in size and be placed at least 60” above grade. See http://www.cityofmadison.com/BI/zoning.html for further information.
Supplementary material required:
A new landscape plan must be submitted to and approved by Zoning prior to a C/O being issued.
Top
