PROJECT 1422:
3502 Lancaster Dr
| Submitted by: | Russ Darrow |
| Project type: | Permitted Use |
| Description: | new entry addition; removal of office space; new parking spaces |
| Status: | completed on 7/30/2009 |
Project has been completed.
| Agency | Status | Requirements | Remarks | Checkout Date | Reviewed |
| Engineering | approved | | 1 | 6/19/2009 | 6/26/2009 |
| Traffic Engineering | approved | | 1 2 | 6/22/2009 | 6/24/2009 |
| Fire | approved | | | 6/24/2009 | 7/1/2009 |
| Engineering Mapping | approved | | 1 2 | 6/25/2009 | 6/29/2009 |
| Zoning | approved | | 1 2 3 4 | 6/22/2009 | 6/25/2009 |
Engineering
Note:
Less than 4,000 sf disturbed area, no Erosion Control & Storm Water Management Permit required.
Top
Engineering Mapping
Note:
The "Site Information" block on Sheet C1.1 calls out an incorrect street name of "High Crossing Blvd" for the Site Address. If another agency requires a plan "redraft", then please revise the final plan set to identify the correct street name address which is "Lancaster Dr". If no other agency requires a plan redraft, simply leave as is.
Note:
Supplementary Condition Completed (was The Applicant shall submit, prior to plan sign-off, a digital CAD file (single file) to the Engineering Program Specialist in the Engineering Division (Lori Zenchenko). The digital CAD file shall be to scale and represent final construction. The single CAD file submittal can be either AutoCAD (dwg) Version 2001 or older, MicroStation (dgn) Version J or older, or Universal (dxf) format and contain the only the following data, each on a separate layer name/level number: a) Building Footprints; b) Internal Walkway Areas; c) Internal Site Parking Areas; d) Other Miscellaneous Impervious Areas (i.e. gravel, crushed stone, bituminous/asphalt, concrete, etc.); e) Right-of-Way lines (public and private); f) All Underlying Lot lines or parcel lines if unplatted; g) Lot numbers or the words “unplatted”; h) Lot/Plat dimensions; i) Street names. All other levels (contours, elevations, etc) are not to be included with this file submittal. NOTE: Email file transmissions preferred Lzenchenko@cityofmadison.com . Include the site address in the subject line of this transmittal. Any changes or additions to the location of the building, sidewalks, parking/pavement during construction will require a new CAD file.)
Top
Traffic Engineering
Note:
Supplementary Condition Completed (was "Stop" and "No Left Turns" signs shall be installed at a height of six (6) feet to the bottom of the first sign at the driveway approaches High Crossing Blvd. “Stop” signs shall be install at all approaches at a height of seven (7) ft. All signs at the approaches shall be installed behind the property line. The applicant will need to submit 4 copies of sheet C1.1 to Traffic Engineering as supplement.)
Note:
Supplementary Condition Completed (was The applicant shall demonstrate semi truck delivery of vehicles ingress, egress and loading / unloading area on-site. The applicant shall not use the High Crossing Blvd or Lancaster Rd for loading and unloading vehicles. The applicant will need to submit 4 copies of sheet C1.1 to Traffic Engineering as supplement. )
Top
Zoning
Note:
Supplementary Condition Completed (was Identify the types and numbers of parking stalls: customer, employee, inventory, service vehicle stalls.)
Note:
Supplementary Condition Completed (was Provide bike parking stalls. One bike parking stall is required for every ten customer and employee parking stalls. A bike parking stall is a minimum of 2 feet by 6 feet with a 5 foot wide access aisle. The rack must be securely anchored to the ground or building and shall be designed to accommodate U-shaped locking devices.)
Note:
Supplementary Condition Completed (was Submit a landscape worksheet showing that the site meets tree and point requirements.)
Note:
Supplementary Condition Completed (was Submit a landscape plan identifying all existing landscape species and numbers.)
Top
