PROJECT 1511:
4717 Hammersley Rd
| Submitted by: | Renschler |
| Project type: | Permitted Use |
| Description: | Addition |
| Status: | completed on 9/24/2009 |
Project has been completed.
| Agency | Status | Requirements | Remarks | Checkout Date | Reviewed |
| Engineering | approved | | 1 | 9/17/2009 | 9/17/2009 |
| Traffic Engineering | approved | | 1 2 | 9/15/2009 | 9/16/2009 |
| Fire | approved | | | 9/17/2009 | 9/17/2009 |
| Engineering Mapping | approved | | 1 | 9/22/2009 | 9/23/2009 |
| Zoning | approved | | 1 2 | 9/22/2009 | 9/22/2009 |
Engineering
Note:
Supplementary Condition Completed (was Submit PDF's of plans for Engineering records. Files can be emailed to Tim Troester at ttroester@cityofmadison.com)
Top
Engineering Mapping
Note:
Supplementary Condition Completed (was The Applicant shall submit, prior to plan sign-off, a digital CAD file (single file) to the Engineering Program Specialist in the Engineering Division (Lori Zenchenko). The digital CAD file shall be to scale and represent final construction. The single CAD file submittal can be either AutoCAD (dwg) Version 2001 or older, MicroStation (dgn) Version J or older, or Universal (dxf) format and contain the only the following data, each on a separate layer name/level number: a) Building Footprints; b) Internal Walkway Areas; c) Internal Site Parking Areas; d) Other Miscellaneous Impervious Areas (i.e. gravel, crushed stone, bituminous/asphalt, concrete, etc.); e) Right-of-Way lines (public and private); f) All Underlying Lot lines or parcel lines if unplatted; g) Lot numbers or the words “unplatted”; h) Lot/Plat dimensions; i) Street names. All other levels (contours, elevations, etc) are not to be included with this file submittal. NOTE: Email file transmissions preferred Lzenchenko@cityofmadison.com . Include the site address in the subject line of this transmittal. Any changes or additions to the location of the building, sidewalks, parking/pavement during construction will require a new CAD file.)
Top
Traffic Engineering
Note:
Supplementary Condition Completed (was "Stop" signs shall be installed at a height of seven (7) feet at all driveway approaches behind the property line and noted on the plan. All directional/regulatory signage and pavement markings on the site shall be shown and noted on the plan. The applicant will need to revise sheet C-1.1 and submit 4 copies to Traffic Engineering. )
Note:
Supplementary Condition Completed (was The applicant shall show dimensions for the existing parking stalls’ items B = 9ft, C = 18 ft, D =36 ft, E = 24 ft, F = 20 ft, and degree of angle parking width and backing up, according to Figures II "Medium and Large Vehicles" parking design standards in Section 10.08(6)(b) 2. The applicant will need to revise sheet C1.1 according to M.G.O. parking design standards. The applicant will need to revise Sheet C1.1 and resubmit 4 copies to Traffic Engineering. )
Top
Zoning
Note:
Supplementary Condition Completed (was Provide a complete updated Parking Lot Site Information Block. It appears that some parking stalls and handicap accessible stalls will be eliminatated to accommodate the proposed addition.)
Note:
Supplementary Condition Completed (was Show the code required bike parking stalls. One bike parking stall per 10 vehicle stalls are required. A bike stall is a minimum of 2 feet by 6 feet with a 5 foot wide access aisle.)
Top
